Limit Offer FB Fashion Boots ANIBAL Forte engineer boots with steel toe cap – brown

FB Fashion Boots Unisex Biker Boots ANIBAL STEEL Nubuck Forte

HANDMADE IN SPAIN.

Fashionable ladies and men’s biker boot with steel toe cap and fully stitched rubber sole.

Inners: 

• The shaft area has been finished with a soft pigskin and the foot area with a cow split leather.
• The inner shaft seams were additionally overstitched with a strip of leather. The use of a comfort insole and the partially padded insole considerably increase the wearing comfort. 

Uppers:

• The welted FB Fashion Boots ANIBAL Forte has a robust cowhide nubuck leather upper.
• Due to the special treatment and the high quality of the leather, the boot is very well suited for motorcycling.
• The leather buckle is adjustable if necessary but not removable.
• The oil-resistant rubber outsole has been completely stitched to the outer frame.
• The FB Fashion Boots brand round lasts have comfortable fits and normal instep heights.

Measurements:

• The ANIBAL Forte biker boot from the FB Fashion Boots brand has a shaft height of approx. 26 cm.
• The rubberised full leather heel has a height of approx. 4 cm.
• The shaft circumference is approx. 38 cm, can be extended or reduced by approx. 1-2 cm depending on the shoe size.

Important notes and tips:

Deviations from the pictured boot:

• Due to the handmade manufacturing method of the FB Fashion Boots products, colour or technical differences may occur compared to the pictured boots!
• Each pair of FB Fashion Boots biker boots is unique!
• With the welted manufacturing method (GOODYEAR WELT), there is always a small break-in period!
• Certain types of leather (NUBUK) also require special care products.